Reclaimed IBC totes delivered across Michigan.
Freight zone 1, same day to next day from our Livonia yard, 12 city pages, and an honest answer about whether shipping this far makes sense for your order size.
Request a delivered price in Michigan
Getting containers into Michigan.
Our home state. Lane 1 covers Metro Detroit the same day, Lane 2 runs west to Grand Rapids weekly and Lane 6 reaches Traverse City fortnightly.
Transit from the Livonia yard is same day to next day, and Michigan sits in freight zone 1 of five. Zones one and two are where our own fleet reaches; from zone three onward we use contract carriers and full truckloads become substantially more economical than partials.
Demand in Michigan is concentrated in automotive chemicals and coatings, greenhouse and nursery growing, food processing and sugar, municipal water works, which shapes what we hold for the state — grade mix, bottle colour and pallet type all follow the application rather than the geography.
What Michigan buys.
The four sectors that account for most of our volume in this state, and what they typically specify.
- Automotive chemicals and coatings
- Greenhouse and nursery growing
- Food processing and sugar
- Municipal water works
- Non-potable site water and dust control, almost always Grade C
- Rainwater capture and irrigation storage, Grade B
- Emergency and fire reserve storage, painted and stencilled
- Upcycled builds from Grade C and D donor stock
12 Michigan locations.
Each city page carries the local freight detail, delivery options and the configurations that ship there most often.
Shipping to Michigan, specifically.
What does delivery to Michigan actually cost?
It depends on quantity far more than on distance. A full trailer of twenty units into zone 1 has a very different cost per unit from a single tote on an LTL pallet.
Tell us the quantity and the delivery postcode in the form on this page and the quote will separate the freight line from the container line so you can see both.
Can you deliver without a loading dock?
Yes. Liftgate delivery lowers units to ground level and is standard for agricultural and site deliveries. It adds time and a fee, and it is far cheaper than the alternative of refusing the load.
Tell us in advance. A liftgate arranged at the quoting stage costs a fraction of one arranged at the dock door.
Is it worth shipping this far for reclaimed containers?
In your zone, almost always yes — the freight premium over a local supplier is small and our grading and documentation are the reason customers stay.
Either way, ask. The quote separates freight from containers so the comparison is easy to make.
Do you collect empties from here too?
Yes, on our scheduled lanes, free from eight units upward, with payment for anything resaleable.
Either way you get a diversion certificate stating unit count, weight and disposition split.
Storing containers outdoors in this climate.
Freeze-thaw cycling is the dominant failure mode across the Midwest, and it is almost always a filling mistake rather than a container fault. Water expands roughly nine percent on freezing and an HDPE bottle will split at the lower corner near the sump, which is not repairable.
Fill water-based cargo to 85% rather than to the brim, store where the unit can drain rather than in a depression that holds meltwater, and keep valves closed and capped — a frozen valve body cracks and you discover it in the thaw, on the ground.
The second, quieter problem is condensation. A vented cap on a stored container pumps moist air in all winter; we have opened units in March with half a litre of free water sitting on the cargo. Solid cap in storage, vented only at the point of use.
- Fill to 85% before the first hard freeze
- Solid caps in storage, vented caps only while dispensing
- Store where meltwater drains away from the pallet
- Thermostatic jackets only — never uncontrolled heat tape on HDPE
- Expect brine and de-icer service to halve cage life
Transit and coverage across Michigan.
| City | Transit from Livonia | Freight zone | Delivery methods |
|---|---|---|---|
| Detroit | Same day to next day | Zone 1 | Dock, liftgate, pallet jack, scheduled lane |
| Grand Rapids | Same day to next day | Zone 1 | Dock, liftgate, pallet jack, scheduled lane |
| Warren | Same day to next day | Zone 1 | Dock, liftgate, pallet jack, scheduled lane |
| Sterling Heights | Same day to next day | Zone 1 | Dock, liftgate, pallet jack, scheduled lane |
| Ann Arbor | Same day to next day | Zone 1 | Dock, liftgate, pallet jack, scheduled lane |
| Lansing | Same day to next day | Zone 1 | Dock, liftgate, pallet jack, scheduled lane |
| Flint | Same day to next day | Zone 1 | Dock, liftgate, pallet jack, scheduled lane |
| Dearborn | Same day to next day | Zone 1 | Dock, liftgate, pallet jack, scheduled lane |
| Kalamazoo | Same day to next day | Zone 1 | Dock, liftgate, pallet jack, scheduled lane |
| Saginaw | Same day to next day | Zone 1 | Dock, liftgate, pallet jack, scheduled lane |
| Traverse City | Same day to next day | Zone 1 | Dock, liftgate, pallet jack, scheduled lane |
| Livonia | Same day to next day | Zone 1 | Dock, liftgate, pallet jack, scheduled lane |
Every city above has its own page with local applications, delivery detail and the configurations that ship there most often.
Running a container programme in Michigan.
Measure your real cycle time first
Annual fills divided by fleet size. Most operators assume eight turns a year and measure four to five. Fleet size is throughput multiplied by cycle time, so this one number determines how many containers you actually need to own.
Decide buy, rotate or rent
Buying reclaimed usually wins on five-year total cost for stable throughput, partly on price and partly because a mixed-age fleet replaces itself on a smooth curve instead of all at once in year six.
Set a reconditioning cadence
Scheduled is cheaper than reactive. Per-unit pricing against a defined scope, guaranteed turnaround windows, and a quarterly fleet health report forecasting which cages and bottles are near end of life.
Fix collection, not washing
Seventy percent of typical cycle time sits at the customer and waiting for collection. Scheduled collection rather than requested collection is the single biggest lever available and it costs nothing.
Audit your markings
Send a serial list and we will run a free desk review. If you have more than fifty units in regulated service there is almost certainly something on that list that is out of periodic test date.
Match freight to Michigan
At freight zone 1 the arithmetic rewards full trailer loads and scheduled consolidation. We load-plan every multi-unit quote and separate freight from containers so the comparison against a local supplier is easy to make.
What drives demand in Michigan.
Our home state. Lane 1 covers Metro Detroit the same day, Lane 2 runs west to Grand Rapids weekly and Lane 6 reaches Traverse City fortnightly.
The four sectors that account for most of our Michigan volume are automotive chemicals and coatings, greenhouse and nursery growing, food processing and sugar, municipal water works. Each one specifies differently: process and food work needs documented prior cargo and a wash record, agricultural work needs volume at the lowest cost per gallon and a liftgate, and site work needs a sound container and nothing else.
**Grade mix.** For Michigan we hold deepest stock in Grade A washed and Grade B rinsed 275-gallon units on steel pallets, because that combination covers the overwhelming majority of enquiries. Rebottled units are built to order in five to ten days. Stainless turns slowly and is worth asking about early.
**Seasonality.** Agricultural demand across the region lifts Grade B and C pricing by fifteen to twenty percent between late February and May. If your timing is flexible, late summer is the cheapest window of the year by a clear margin.
**Take-back.** We buy containers in Michigan as well as selling them. Collection is free from eight units upward on our scheduled lanes, with payment inside ten business days and a diversion certificate for your own reporting.
Baseline specifications for everything we handle.
| Container | Capacity | Footprint | Height | Tare | Gross at SG 1.0 | Per 53' trailer |
|---|---|---|---|---|---|---|
| Caged composite IBC | 275 gal / 1,040 L | 40 × 48 in | 46 in | 127 lb | 2,420 lb | 20 floor / 40 stacked |
| Caged composite IBC, XL | 275 gal / 1,040 L | 40 × 48 in | 53 in | 132 lb | 2,425 lb | 20 / 40 |
| Caged composite IBC | 330 gal / 1,250 L | 40 × 48 in | 53 in | 145 lb | 2,900 lb | 20 / 40 |
| Caged composite IBC | 350 gal / 1,325 L | 48 × 48 in | 52 in | 170 lb | 3,090 lb | 18 / 36 |
| Stainless bin, 304 | 350 gal / 1,325 L | 48 × 42 in | 55 in | 420 lb | 3,340 lb | 18 / — |
| Stainless bin, 316L | 500 gal / 1,893 L | 52 in dia. | 74 in | 580 lb | 4,750 lb | 14 / — |
| Poly drum, closed head | 55 gal / 208 L | 23 in dia. | 34.5 in | 22 lb | 480 lb | 80 on pallets |
| Steel drum, lined | 55 gal / 208 L | 22.5 in dia. | 33.5 in | 38 lb | 496 lb | 80 on pallets |
| Salvage overpack | 95 gal / 360 L | 28 in dia. | 40 in | 35 lb | 827 lb | 40 on pallets |
Figures are nominal and vary a little by moulder. Always multiply net volume by the actual specific gravity of your cargo before checking a forklift or racking rating.
The grading system, in one table.
| Grade | Prior cargo | Wash route | Clean index | Price index | Drops a grade if |
|---|---|---|---|---|---|
| A — Food | One, food only, documented | Route 3 potable triple rinse | 100 | 100 | More than one cargo, missing declaration, film on scope, odour fail |
| A — Rebottled | None — new bottle | New, unused | 98 | 86 | Cage fails node inspection or leak test |
| A — Washed | Non-hazardous industrial | Route 2 hot caustic | 92 | 74 | Ghosting remains, or cargo history unverifiable |
| B — Rinsed | Mixed industrial | Route 1 rinse | 72 | 52 | Structural repair, or odour a buyer would notice |
| C — Non-potable | Heavier residue, repaired | Route 1 rinse | 48 | 34 | Any crazing, any persistent bulge, failed leak test |
| D — Reclaim | Failed test or structure | Not resold | 16 | 9 | Not applicable — this is the floor |
Price index is relative to Grade A food at 100, not a quote. The absolute level moves with resin, scrap steel, freight rates and the agricultural season.
Bays, decks and the weather they live in.
Michigan concrete, a flatbed mid-load and the stacks these containers sit in between lives. No stock imagery anywhere on this site.
Freight arithmetic, in one place.
| Vehicle | 275 gal filled | 275 gal empty | 330 gal filled | Drums on pallets |
|---|---|---|---|---|
| 53 ft dry van | 20 | 40 double-stacked | 20 | 80 |
| 48 ft dry van | 18 | 36 | 18 | 72 |
| 26 ft box truck | 10 | 20 | 10 | 40 |
| Flatbed, strapped | 20 | 20 (no stacking) | 20 | 60 |
| 20 ft ocean container | 10 | 20 | 10 | 40 |
| 40 ft ocean container | 22 | 44 | 22 | 88 |
| Pickup with trailer | 2–4 | 4–8 | 2–4 | 8–12 |
Twenty-two is the worst number of totes to order: a 53-foot trailer holds twenty, so twenty-two pays for two trailers to move two containers. We load-plan every multi-unit quote for exactly this reason.
What arrives with the containers.
None of this is optional or chargeable. It is the difference between a reclaimed container and an anonymous second-hand one.
- A prior-contents sheet naming the product, the fill date and the company that filled it
- Four photographs of the actual unit plus an image of the cage stamp
- The grade assigned, and the published criteria that grade commits us to
- A wash record where the unit went through Route 2, 3 or 4, with temperature, dwell, rinse count and final rinse conductivity
- A leak test record for every Grade A and Grade B unit: method, pressure, hold time and measured decay
- The UN plate photograph and periodic test dates where the unit is marked
- A component list naming gasket material, valve type and cap type
- The cage passport ID, so the whole service history can be reissued later
- An allergen flag where a prior food cargo included dairy, egg or tree-nut oils
- A standing take-back offer: when you are finished, we collect and pay
Delivery and collection questions.
Do you ship internationally?
Yes. Steel or plastic pallets to avoid ISPM 15 timber treatment requirements, double-stacked empties because ocean freight is priced per container, and a wash record plus prior-contents documentation in the pack.
Twenty-two units floor-loaded in a 40-foot container, forty-four double-stacked empty. Block and brace properly: ocean movement is far more violent in the vertical and roll axes than road movement.
Why is there no phone number?
Cargo declarations have to be written to be worth anything, a container quote involves nine variables that nobody holds accurately in conversation, and most of our customers are on a forklift rather than at a desk.
Every form submission is read by a person and answered within one business day, usually much sooner. Nothing is agreed that is not written down. For genuinely complex work we will schedule a video call.
Can you deliver without a loading dock?
Yes. Liftgate delivery lowers units to ground level and is standard on agricultural and construction-site work, not an exception.
Arrange it at the quoting stage. A liftgate booked then costs a fraction of one arranged at the door, and a refused delivery costs more than both.
Will you collect my empties?
Free from eight units inside our six weekly lanes, with payment for anything resaleable and a diversion certificate stating unit count, weighed mass and disposition split.
Further out, a collection needs to be close to a full trailer load or matched against a delivery on the same trip. We have never issued a disposal invoice.
How fast can you turn an order around?
Grade B and C from floor stock, usually the same week. Grade A washed, two to five business days. Rebottled, five to ten because bottles are fitted to order. Then add transit for your zone.
Wash bay throughput is about 90 units a day on Route 1 or 2 and 55 on Route 3. In practice turnaround is set by inspection and photography, not by washing.
Do you work with public buyers?
Regularly — municipalities, fire departments, school districts, county emergency management and state agencies.
Itemised quotes with freight on a separate line, W-9 and insurance certificates in one email, sealed bids where required, and we will hold stock against a purchase order that has not cleared yet if you tell us the situation.
The buying calendar, because this market is seasonal.
| Window | Availability | Pricing pressure | Best for | Avoid |
|---|---|---|---|---|
| January – February | Good across all grades | Soft | Grade A industrial stock, fleet contracts | Nothing |
| March – May | Grade B and C tight | Up 15–20% on B and C | Grade A, which barely moves | Buying Grade B for agriculture |
| June – August | Softening across the board | Lowest of the year on B and C | Grade B and C, stockpiling for spring | Nothing |
| September – November | Steady | Freight tightens before the holidays | Mixed loads, take-back collections | Leaving freight to the last week |
| December | Thin and variable | Unpredictable freight | Yard pickup | Tight delivery deadlines |
If your timing is flexible, buying Grade B in late summer rather than April is the single easiest saving available in this market.
Cargo weight by specific gravity.
| Cargo | SG | 275 gal net | 275 gal gross | 330 gal gross | Notes |
|---|---|---|---|---|---|
| Ethanol, 190 proof | 0.81 | 1,858 lb | 1,985 lb | 2,375 lb | Flammable — conductive container required |
| Used motor oil | 0.89 | 2,042 lb | 2,169 lb | 2,595 lb | Warm before pumping in winter |
| Canola oil, refined | 0.92 | 2,110 lb | 2,237 lb | 2,678 lb | Hot wash route only |
| Water | 1.00 | 2,294 lb | 2,421 lb | 2,898 lb | The baseline for everything |
| Propylene glycol | 1.04 | 2,386 lb | 2,513 lb | 3,008 lb | Commonest tote cargo in the Midwest |
| Urea solution 32.5% | 1.09 | 2,500 lb | 2,627 lb | 3,145 lb | Freezes at 12 °F |
| Hydrochloric acid 35% | 1.18 | 2,707 lb | 2,834 lb | 3,393 lb | Viton gaskets, never EPDM |
| Liquid cane sugar | 1.33 | 3,051 lb | 3,178 lb | 3,804 lb | Near the density limit for a 330 |
| Ferric chloride 40% | 1.42 | 3,258 lb | 3,385 lb | 4,052 lb | Stains HDPE permanently |
| Caustic soda 50% | 1.53 | 3,510 lb | 3,637 lb | 4,355 lb | 275 only; check the forklift rating |
| Sulphuric acid 93% | 1.83 | 4,198 lb | 4,325 lb | 5,208 lb | Steel or stainless service, not poly |
Gross figures include tare of 127 lb for a 275 and 145 lb for a 330 on steel pallets. The maximum net mass on the UN plate is a separate and binding limit.
Buying questions, answered at length.
Will you tell me to buy something cheaper?
Frequently, and it is commitment seven of our circular pledge: every new-container quote includes the nearest reclaimed option with the carbon difference written out.
We also steer dense cargo from 330s to 275s, site water from Grade A to Grade C, and drinking water away from used bottles entirely.
What is the minimum order, really?
One unit, on every product line. There is no hidden minimum and no 'pallet quantity only' rule.
Freight is what makes single units expensive. Inside our six weekly lanes we will usually fold one tote into a scheduled route rather than quoting LTL, which is why a single-unit order to Toledo costs a fraction of a single-unit order to Dallas.
Can I see the exact units before paying?
Yes, and it is standard rather than a concession. Four photographs per unit plus the cage stamp, tagged to a bay number, emailed before payment.
This started as a way of ending a recurring argument about Grade B expectations. It turned into our most effective quality control, because an inspector who knows the photograph goes to the customer grades more conservatively.
How do I know the grade is honest?
Because the disqualifiers are published. A Grade A food unit drops to Grade A washed if there is more than one prior cargo, if the declaration is missing, if third-rinse conductivity is out of tolerance, if the scope shows film, or if the odour check fails.
Ask any supplier what would disqualify a unit from the grade they just sold you. A supplier who cannot answer immediately does not have a grading system.
What happens if a unit is not as described?
We replace it, re-grade and refund the difference, or collect it and refund in full — your choice, not ours.
We have refunded four units in the last three years. All four were our grading error, and all four customers still buy from us.
Do you substitute units without telling me?
No. Container reconditioning depends on inspection outcomes we cannot fully predict, so units occasionally fail during processing.
When that happens we tell you immediately and offer the nearest available alternative, rather than quietly shipping something different and hoping the photographs were not studied.
Eight mistakes we watch customers make, repeatedly.
None of these are stupid. All of them are expensive, and every one of them has happened to somebody competent in the last twelve months.
1. Multiplying volume by 8.34 and forgetting specific gravity
A 275-gallon tote of 50% caustic soda grosses 3,637 lb, not 2,420. Forklift capacity ratings, racking beams and warehouse floors all care about the real number. This is the single most common serious miscalculation in liquid handling.
2. Buying Grade A washed for site water
Cosmetic condition has no effect on how well a container holds water for dust suppression. Grade C costs a third as much and lasts exactly as long under that treatment. Roughly half the customers who ask for Grade A are paying for appearance they do not need.
3. Fitting a vented cap for storage
A vented cap is a dispensing device. Left on a stored container it pumps moist air in all winter, and we have opened totes in March with half a litre of condensate sitting on top of the cargo. Solid cap in storage and transit; vent at the point of use.
4. Filling to the brim before a freeze
Water expands about nine percent on freezing and an HDPE bottle will crack at the lower corner near the sump almost every time. Fill water-based cargo to 85% and store where the unit can drain.
5. Reusing the gasket
The cheapest component in the assembly and the most common source of carried-over odour and cross-contamination. Gaskets take a compression set, harden, and hold prior cargo in the elastomer.
6. Ordering twenty-two units
A 53-foot trailer holds twenty. Twenty-two pays for two trailers to move two containers. Tell us if your number is flexible and we will tell you which way to move it.
7. Forcing a buttress thread
S60×6, S70×6 and S75×6 will each start on the others and then bind. Two turns and a stop means the wrong standard, and forcing it crazes the bottle neck permanently.
8. Storing translucent bottles outdoors
UV plus freeze-thaw cycling is what finally kills HDPE. We have measured 10% wall loss on the south face of bottles after five years in the open, with the shadow pattern of the cage printed onto the plastic. Black UV-stabilised bottles outlast translucent ones by three to four times outdoors.
Which grade for which application.
| Application | Grade | Size | Gasket | Never use |
|---|---|---|---|---|
| Drinking water, any volume | A — rebottled | 275 gal | EPDM, FDA compliant | Any used bottle |
| Food ingredient, same category | A — food | 275 gal | EPDM, FDA compliant | Industrial-history units |
| Allergen-sensitive food | A — rebottled | 275 gal | EPDM, FDA compliant | Used bottles of any grade |
| Regulated chemical refill | A — washed, in-date plate | 275 gal | Specified to cargo | Out-of-date markings |
| High-purity or DI water | A — rebottled | 275 gal | EPDM | Used bottles |
| Fertiliser and fertigation | B — rinsed | 275 or 330 gal | EPDM | Food-grade stock — wasteful |
| Livestock water | B — rinsed, documented | 275 gal | EPDM | Unknown-history units |
| Compost tea and digestate | B — rinsed | 275 gal | EPDM, vented at use | Sealed caps — gas generation |
| Site water and dust control | C — utility | 275 gal | EPDM | Paying for appearance |
| Ballast and erosion control | C — utility | 275 gal | Any | New containers |
| Fire and standpipe reserve | C — painted, stencilled | 275 or 330 gal | EPDM | Translucent bottles outdoors |
| Flammable liquids | Steel or conductive IBC | Per design | Viton or PTFE | Standard poly totes |
| Aggressive acids above SG 1.6 | Stainless or lined steel | 350 gal | PTFE | Poly totes |
| Fabrication donor stock | C or D | Any | n/a | Food-grade donors |
The pages our own staff keep open.
The six weekly lanes, and what riding one costs you.
| Lane | Runs | Transit | Single unit on the lane | Single unit on LTL |
|---|---|---|---|---|
| Detroit metro and Ann Arbor | Daily | Same day | Lowest — folded into the route | Not worth quoting |
| Toledo – Findlay – Columbus | Tue, Fri | 1 day | Low | 3–4× the lane rate |
| Grand Rapids – Holland – Muskegon | Wed | 1 day | Low | 3× the lane rate |
| Flint – Saginaw – Bay City | Thu | Same day | Low | 3× the lane rate |
| Chicago – Gary – Milwaukee | Mon, Thu | 1–2 days | Moderate | 2–3× the lane rate |
| Cleveland – Akron – Youngstown | Tue | 1 day | Moderate | 2–3× the lane rate |
| Indianapolis – Fort Wayne | Alternate Wed | 1–2 days | Moderate | 2× the lane rate |
| Everywhere else in the lower 48 | By carrier | 2–6 days | n/a | Quoted per shipment |
Lane day beats distance, every time. A single tote to Toledo on a Tuesday costs a fraction of the same tote to Toledo on a Wednesday, because on Tuesday it rides a truck that was already going. Always ask which day we run your lane before you fix a delivery date.
Lead times, honestly, by grade and quantity.
| Order | Grade A food | Grade A washed | Grade B | Grade C | Rebottled |
|---|---|---|---|---|---|
| 1–4 units | 2–4 days | Same or next day | Same or next day | Same day | 3–5 days |
| 5–19 units | 3–6 days | 1–3 days | 1–2 days | Same or next day | 5–8 days |
| 20 (one trailer) | 5–8 days | 2–4 days | 2–3 days | 1–2 days | 7–10 days |
| 21–60 | 1–2 weeks | 4–8 days | 3–6 days | 2–4 days | 2–3 weeks |
| 61–200 | 2–4 weeks | 1–2 weeks | 1–2 weeks | 4–8 days | 4–6 weeks |
| Over 200 or scheduled programme | By schedule | By schedule | By schedule | By schedule | By schedule |
Grade A food is slower than everything else because Route 3 runs at 55 units a day against 90 on the other routes, and because the paperwork is checked twice. In March to May, add roughly a week to Grade B and C — that is the agricultural pull, and it is the most predictable thing in this market.
Stock waiting on inspection.
Delivery readiness, so nothing goes back on the trailer.
Every item here has, at least once, sent a loaded truck away from a site without unloading. That costs both of us money and it is entirely preventable with an email.
- Somewhere level and bearing to put them — a full 275 is 2,420 lb on 13 sq ft
- A forklift rated for the real gross weight, not the water weight, if you are taking filled units
- Pallet jack access if the base is two-way only, which we will have told you
- Someone on site during the delivery window who can sign and who knows what was ordered
- A dock, or a lift gate requested at quote stage — a 53-foot van cannot put a tote on the ground
- Trailer access confirmed: turning radius, overhead clearance, gate width, weight limit on the approach
- Your own receiving check planned, with the despatch photographs printed or on a phone
- Secondary containment ready if your cargo or jurisdiction requires it
- Storage decided: indoors, or black and painted units if they are living outside
- The old units gathered in one place if we are collecting on the same visit
Freight, delivery and collection.
Can I collect from the yard myself?
Yes, and it is the cheapest option of all. 11966 Brookfield St, Livonia, MI 48150. Bring straps, and tell us what vehicle you are bringing so we can have the units in a bay you can reach.
A pickup with a trailer takes two to four filled units or up to eight empties. December is the month we most recommend yard pickup, because freight pricing that month is genuinely unpredictable.
Do you hold stock for scheduled programmes?
Yes. If you need a predictable number of units on a predictable cadence, we reserve stock and plan wash bay capacity around it, which is worth more than a discount — it converts a lead time into a delivery date.
Route 3 capacity is the binding constraint at 55 units a day, so food-grade programmes need the most notice and are the ones where scheduling pays off most.
Why don't you have a telephone number?
Deliberately. Everything in writing means every grade claim, wash parameter, test result and freight quote is reviewable later — by you as much as by us — and nothing depends on what somebody remembers from a call.
In practice it is also faster. The reply to an emailed enquiry names the actual units with photographs and bay numbers, which is not something anyone can do while you hold the line.
What is the cheapest way to get one tote?
Ride a lane. We run six scheduled weekly routes out of Livonia, and a single unit folded into a truck that was already going costs a fraction of an LTL shipment of the same unit on a different day.
Ask which day we run your lane before you fix a delivery date. Lane day beats distance every time: a tote to Toledo on a Tuesday is cheaper than a tote to Toledo on a Wednesday by a margin that often exceeds the price difference between two grades.
Can you deliver without a dock?
Yes, but it has to be arranged at quote stage. A 53-foot van cannot put a tote on the ground by itself — that needs a lift gate, our own truck, or a forklift at your end rated for the real gross weight.
This is the most common reason a loaded truck leaves a site without unloading, and it is entirely preventable with one line in an email.
How many containers fit in a trailer, really?
Twenty filled 275s or 330s on the floor of a 53-foot van. Forty empties double-stacked. Eighteen filled in a 48-foot, ten in a 26-foot box truck, twenty-two in a 40-foot ocean container.
The number worth remembering is twenty, because it is the cliff. Twenty-two units pays for two trailers to move two containers, and we load-plan every multi-unit quote specifically to catch that before you commit.
Do you ship outside the Midwest?
Across the lower 48, by carrier, in two to six days depending on distance and lane density. Outside the six weekly lanes we quote per shipment because the freight stops being a rounding error and starts being a real part of the delivered cost.
For anything over twenty units the lane advantage matters much less, since you are paying for a dedicated trailer either way. Long-distance orders are usually full-trailer orders for exactly that reason.
The twelve-minute check to run when the truck arrives.
Do this before the driver leaves, with the paperwork in your hand. It takes about a minute a unit on a small order and it is the only moment when a problem costs you nothing to raise.
Before anything comes off the trailer
- Count the units and compare against the bill of lading, not against memory.
- Photograph the load in the trailer, from the door, before the first unit moves. This single photograph settles almost every freight-damage dispute.
- Look along the top of the load for crushed cages, which is what a stacked load that shifted looks like.
On each unit, as it lands
- Read the cage stamp and check it against the photographs you were sent. Same unit, or not.
- Cap on and tight? A missing or loose top cap means the unit travelled open.
- Dust cap on the discharge? If it is missing, the valve has been exposed to road spray.
- Open and close the valve through full travel, then wipe it dry and watch it for a minute.
- Look along the lower corners and the sump under a raking light for whitening or cracks.
- Check the diagonals by eye: a cage out of square has been hit.
- Look at the base welds, all four corners, with the unit lifted a couple of inches.
- Read the UN plate and confirm the periodic dates match what you ordered, if your cargo is regulated.
On the paperwork, before you sign
- Prior-contents sheet present, naming product, filler and fill date.
- Grade stated, and the wash record attached if it was Route 2, 3 or 4.
- Leak test record present for every A and B unit, with actual numbers on it.
- Gasket material named on the component list, and matching your cargo.
If something is wrong
Note it on the delivery paperwork before signing and photograph it with the unit's cage stamp in the same frame. Then email us. With a cage ID and a photograph we can pull the intake record, the wash log, the leak test and the despatch photographs within minutes, and the conversation is about facts rather than recollection. Units that are not as described come back on our freight, not yours.
What actually moves the price of a reclaimed tote.
| Driver | Direction | Typical effect | Can you control it? |
|---|---|---|---|
| Grade | A costs more than C | Up to 3× across the range | Yes — most buyers over-specify |
| Wash route required | Route 3 over Route 1 | +18 to +30% | Yes, by naming the real end use |
| New bottle (rebottled) | Up | +40 to +60% over washed | Yes — only food and potable truly need it |
| Quantity against trailer fit | 20, 40, 60 are efficient | ±15% on delivered cost | Yes, and this is the easiest saving |
| Freight zone and lane | Lane beats distance | ±40% on delivered cost | Partly — ask which day we run your lane |
| Season | B and C peak in spring | +15 to +20% March–May | Yes, if your timing is flexible |
| Pallet base specified | Steel or composite over timber | +4 to +20% on the base | Yes |
| New valve and cap | Up | Fixed per unit | Yes — reconditioned hardware is an option on C |
| UN plate in date | Up | +8 to +12% | Only if your cargo is regulated |
| Resin and scrap steel index | Both directions | Moves the whole market | No |
| Diesel | Up with fuel | Freight line only | No |
| Take-back credit on your old units | Down, against the invoice | Offsets part of the order | Yes — ask before you dispose |
We quote containers and freight as separate lines, because a single delivered number hides which of these twelve things you are actually paying for. If a quote you are comparing does not split them, ask.
Cold weather: what freezing actually does, and the four rules.
We are in Livonia, Michigan. We see what winter does to containers every year, and almost all of the damage is avoidable with four decisions made in October rather than January.
What freezing does
Water expands about nine percent when it freezes, and it does not expand evenly — it grows from the coldest surfaces inward, which in a tote means from the walls toward a shrinking core of liquid. The pressure goes somewhere, and in an HDPE bottle it goes to the thickest, most restrained geometry: the lower corner next to the sump. That is why the crack is almost always in the same place, and why it usually appears on thaw rather than on freeze.
Rule one — fill water-based cargo to 85%
Leave the top sixteen percent of a 275 empty and the ice has somewhere to grow. This one decision prevents the great majority of freeze cracks we see. For a 275-gallon tote that is about 234 gallons, and the ribbing on most bottles gives you a usable visual mark at roughly the right height.
Rule two — never forklift a cold full tote hard
Below about −20 °F, HDPE is brittle rather than tough. The same impact that leaves a white mark in July cracks the wall in February. Slow approach, square entry, no dropping the last inch.
Rule three — solid cap, and a drain path
A vented cap in winter is a condensation pump: it breathes moist air in on every temperature cycle, and that water collects on top of the cargo. Solid cap for storage and transit. Store the unit where meltwater can drain away from the base rather than freezing around it, because ice around a steel base is how galvanising gets breached.
Rule four — warm the product, never the bottle
Cold cargo is a viscosity problem, not a blockage. Used motor oil wants to be above about 60 °F before you try to pump it. Warm the product in a heated space or with a blanket rated for IBC use; never apply direct flame, a torpedo heater pointed at the wall, or anything that puts a hot spot on the HDPE. Heat-affected plastic does not recover, and a bottle that has been locally overheated will fail later with no visible warning.
The cargo-specific cases
DEF (urea 32.5%) freezes at 12 °F, expands, and recovers its specification on thaw if it was not overheated — the container is the fragile part, not the fluid. Sodium hypochlorite loses strength steadily at any temperature and faster warm, so winter storage is actually kind to it. Latex products are finished if they freeze. Glycols are fine, which is rather the point of them.
Price, quantity and timing.
What is the most expensive mistake buyers make?
Specific gravity, by a wide margin, and it is never the container that fails. A 275-gallon tote of 50% caustic soda grosses 3,637 lb rather than 2,420. What fails is a forklift, a racking beam or a warehouse floor rated for the water figure.
Second place is buying Grade A for a job Grade C does. Third is ordering twenty-two units. All three cost more than the containers did.
Can I rent instead of buying?
We do not rent, and the arithmetic is why: a reclaimed tote costs a fraction of a new one and holds residual take-back value at end of life, so for almost every use case buying and selling back beats renting.
Where people genuinely want rental, what they usually want is a scheduled programme — units delivered when needed, collected when finished, credited on return. That we do, and it behaves like rental on your cash flow without the premium.
Why is one supplier's Grade A cheaper than another's?
Because 'Grade A' is not a standard. It is whatever each supplier means by it, and the only way to compare two of them is to ask what would disqualify a unit from that grade and what records come with it.
A washed unit with one documented food cargo, a logged Route 3 wash, a new gasket and a leak test with numbers on it is a different object from a rinsed unit that looked clean. Both get called Grade A. One of them costs forty percent more and is worth it; the other is a gamble priced like a certainty.
Is it cheaper to buy twenty or to buy five, four times?
Twenty, nearly always, and the reason is freight rather than any volume discount on the containers. Twenty units fill the floor of a 53-foot van, so the freight per unit is at its lowest point on the whole curve.
The cliff is just past it: twenty-two units pays for two trailers to move two containers. If your number is anywhere near a trailer boundary, tell us it is flexible and we will tell you which way to move it.
Do you ever tell people to buy a cheaper grade?
Constantly, and it is the most reliable sales tactic we have. Roughly half the enquiries that ask for food-grade are for site water, dust suppression, ballast or fabrication, where Grade C does the same job for about a third of the price and lasts exactly as long under that treatment.
The money we lose on the first order we get back on the next four, and it means that when we do say you need rebottled, you can believe us.
What does take-back actually pay?
It depends on condition band and on what the cargo was, and we quote it per unit rather than as one number for the lot — good units, utility units and reclaim units priced separately so you can see what you are being paid for.
We pay for units that will fail every test, because a cage is 55 lb of steel at 92% recovery and a bottle is 42 lb of HDPE at 68%. Buying that material from you is cheaper for us than buying it on the open market, which is the whole economic argument for a take-back programme existing.
Why are containers and freight on separate lines?
Because a single delivered number hides which of a dozen variables you are paying for, and makes comparing two quotes impossible. Grade, wash route, hardware, pallet base, plate status, lane, season and quantity all move independently.
It also means that when you come back in six months, we can tell you whether the price moved because resin moved or because diesel moved. If a quote you are comparing does not split them, ask — the answer tells you something either way.
Chemical compatibility, container by gasket.
| Cargo | HDPE bottle | EPDM | Viton | PTFE | Note |
|---|---|---|---|---|---|
| Water, potable | Excellent | Excellent | Excellent | Excellent | Rebottled or Grade A food only |
| Sodium hypochlorite 12.5% | Good | Fair | Good | Excellent | Vent — the cargo off-gasses and will bulge a sealed bottle |
| Caustic soda 50% | Excellent | Excellent | Good | Excellent | SG 1.53 — 275 gal only, check the forklift plate |
| Sulphuric acid 93% | Not suitable | Not suitable | Fair | Excellent | Lined steel or stainless service, never poly |
| Hydrochloric acid 35% | Good | Not suitable | Excellent | Excellent | Viton only; HCl destroys EPDM in weeks |
| Nitric acid 10% | Fair | Not suitable | Good | Excellent | Oxidiser — embrittles HDPE over months |
| Phosphoric acid 75% | Good | Fair | Good | Excellent | Common fertiliser intermediate |
| Propylene glycol | Excellent | Excellent | Excellent | Excellent | The most-handled tote cargo in the Midwest |
| Ethylene glycol | Excellent | Excellent | Excellent | Excellent | Label clearly — it is routinely confused with PG |
| Ethanol, 190 proof | Good | Fair | Excellent | Excellent | Flammable — conductive container and bonding required |
| Methanol | Good | Fair | Excellent | Excellent | Permeates slowly through HDPE; not for long storage |
| Mineral oil, white | Excellent | Not suitable | Excellent | Excellent | EPDM swells in hydrocarbons |
| Used motor oil | Excellent | Not suitable | Excellent | Excellent | Warm to 60 °F before pumping in winter |
| Diesel and heating oil | Good | Not suitable | Excellent | Excellent | Check local rules before storing fuel in an IBC |
| Vegetable and canola oil | Excellent | Good | Excellent | Excellent | Hot wash route afterwards or it polymerises |
| Urea solution 32.5% (DEF) | Excellent | Excellent | Excellent | Excellent | Freezes at 12 °F, expands, then recovers |
| Liquid fertiliser 28-0-0 | Excellent | Excellent | Excellent | Excellent | Stains the bottle; does not harm it |
| Ferric chloride 40% | Excellent | Not suitable | Excellent | Excellent | Permanent orange staining — cosmetic only |
| Hydrogen peroxide 35% | Fair | Not suitable | Good | Excellent | Vented cap mandatory; dedicated bottle, never reused |
| Acetic acid 80% | Good | Fair | Good | Excellent | Odour carries over — dedicate the unit |
| Latex paint and coatings | Excellent | Good | Excellent | Excellent | Never let it dry inside; a cured film is unremovable |
| Toluene, xylene, MEK | Not suitable | Not suitable | Good | Excellent | Aromatic solvents swell and soften HDPE |
| Isocyanates and polyols | Refused | Refused | Refused | Refused | On our published exclusion list — they cure |
| Firefighting foam concentrate | Refused | Refused | Refused | Refused | PFAS risk; we will not take it at any price |
Ratings are for ambient-temperature storage in a reclaimed container, not for pressurised or heated service. Every 20 °F above 100 °F roughly halves the service life of the rating. When the cargo is not on this list, send us the SDS and we will tell you what we would and would not put it in.
Storing and stacking: the rules, and why each one exists.
Most storage damage we see on returned units comes from four or five decisions, all of which look harmless at the time.
Read the plate before you stack anything
The permissible superimposed load is marked on the UN plate. A zero means do not stack, even empty. Where a figure exists, it assumes a container at normal temperature on level ground with an evenly distributed load above it — not one in July sun, not one on a tilt, not one with a second unit landed on a corner.
Filled stacking
Two high, same footprint, same size, directly aligned cage on cage, on flat bearing ground, below 100 °F ambient. Above 100 °F derate by half; above 120 °F do not stack at all. Never stack a filled 275 on a filled 330, never stack across different footprints, and never stack onto a unit whose cage has cracked nodes or an out-of-square diagonal.
Empty stacking
Four high is routine for transport and two to three high is sensible for standing storage, which is how a 53-foot trailer takes forty empties against twenty filled. Empty does not mean weightless: an empty 275 is still 127 lb on top of whatever is under it.
Racking
An IBC in a rack is held by its base, and the rack needs to be rated for the real gross weight — which means net volume times the actual specific gravity of your cargo, plus tare. A 275 of 50% caustic is 3,637 lb, not 2,420. Racking failures in this trade are almost always a specific gravity arithmetic error rather than a rack defect.
Outdoors
Black or painted bottles only, if the unit is going to live outside. Translucent HDPE in the open loses roughly ten percent of its wall on the sun face in five Michigan years, with the shadow pattern of the cage printed into the plastic where the tubes shaded it. Keep units off bare soil, on gravel or pavers, where meltwater drains away from the base rather than freezing around it.
Secondary containment
Decided by your cargo and your jurisdiction, not by the container. If you need it, size it for the largest single container plus a margin, and remember that a spill pallet rated for a drum is not rated for an IBC.
The boring one that matters
Valve closed, solid cap on, dust cap fitted, in storage. Every time. A valve stored open takes a compression set in the seat and weeps when you finally close it, and that is the single most common post-delivery complaint in this trade.
Selling us your empties, in six steps.
We buy containers in any condition, including units that will fail every test. Material has value, and a collection that only takes the good ones leaves you with a disposal problem.
1 — Count and name the cargo
How many units, what size, and what was in them — product name and the company that filled them. The cargo decides the price and whether we can take them at all; the condition decides the rest.
2 — Photographs, rough is fine
A phone photograph of the stack and a couple of close-ups of the worst units. We are not grading from photographs, we are checking for the obvious disqualifiers before sending a truck.
3 — Written offer, per unit, by condition band
Not one number for the lot. Good units, utility units and reclaim units are priced separately, so you can see what you are being paid for rather than taking an average on trust.
4 — We schedule onto a lane
If you are on one of our six weekly routes, collection is usually inside the week and costs nothing. Further out we combine with a delivery going your way, which is what backhaul utilisation of 41% is for.
5 — Weighed and counted on arrival
Yard scale, against the manifest. Any discrepancy comes back to you with the scale ticket, in both directions — we have paid out more than was offered more than once.
6 — Payment, and a disposition record
Payment on agreed terms, plus a written record of where your units actually went: resold, rebottled, upcycled, recycled to material, or the residual fraction. Several customers use that record in their own reporting, which is why it exists in that format.
Symptom, cause, what to do about it.
| Symptom | Most likely cause | Check first | Fix |
|---|---|---|---|
| Weeping at the valve when closed | Seat compression set from long open storage | Close fully, wipe dry, watch 10 min | Replace the valve; store closed in future |
| Drip from under the valve body | Flange gasket, not the valve | Feel behind the valve for wet | Pull the valve, new flange gasket |
| Cargo odour in a clean tote | Original gasket retained, or cap gasket | Smell the gasket itself, off the unit | New gasket; re-rinse; air with the cap off |
| Bottle bulging at mid-wall | Overfill, heat, or off-gassing cargo | Cargo SDS for gas generation; ambient temp | Vented cap at point of use; reduce fill to 85% |
| Condensate on top of the cargo | Vented cap left on in storage | Which cap is fitted | Solid cap for storage; vent only when dispensing |
| Crack at the lower corner | Water-based cargo froze at full fill | Fill level history | Unit is finished — we will take it back for reclaim |
| White cloudy patch at the sump | Stress whitening from forklift impact | Raking light for branching cracks | Monitor; no crazing means serviceable, Grade C |
| Fine branching cracks | Crazing, from chemical stress or UV | Any raking light at a shallow angle | Retire the bottle; the cage and base are reusable |
| Flow stops mid-discharge | Vacuum lock — no air in | Crack the top cap and listen | Vent while dispensing, always |
| Slow flow on a cold morning | Cargo viscosity, not a blockage | Cargo temperature against its SDS | Warm the product; never heat the bottle directly |
| Adapter binds after two turns | Wrong buttress standard | Compare S60×6 / S70×6 / S75×6 | Correct adapter or a proper reducer; never force |
| Cage node cracked | Impact, or a stacked load over rating | Count cracked nodes; check plate stack rating | Do not stack; return for cage swap |
| Tote rocks on the forks | Base weld failed at one corner | Lift 2 in and look at all four welds | Take out of service immediately — transplant job |
| Rust bleeding through the zinc | Galvanising breached, usually at a weld | Wire-brush a test patch | Cosmetic for utility use; fails food-grade intake |
| Label illegible after a season | Direct-print on HDPE in UV | Whether the UN plate is also fading | Stencil and clear-coat, or stainless tag |
Questions from people running these in the field.
How long can I leave a cargo sitting in a tote?
The container is usually not the limit — the cargo is. Hypochlorite loses strength continuously and faster when warm. Hydrogen peroxide off-gasses and needs a vent throughout. Vegetable oils oxidise. Latex is finished if it freezes. Glycols and fertilisers are indefinitely stable.
For the container itself: solid cap, valve closed, out of direct sun, filled to 85% if the cargo is water-based and the temperature will drop below freezing. Under those conditions a sound bottle will sit for years without any change we can measure.
Can I store drinking water in a reclaimed tote?
In a rebottled unit, yes — a new HDPE bottle in an inspected cage, with an FDA-compliant EPDM gasket and new closures. For potable water that is the only option we will sell you.
Not in a washed unit, however good the wash. The bottle has a history, and for drinking water the correct answer to 'what was in it before?' is 'nothing'. Keep it out of sunlight, use it within a season, and treat the water as your own responsibility rather than the container's.
Is a tote safe for diesel or heating oil?
The container handles it: HDPE is good with diesel and a Viton gasket is correct — never EPDM, which swells in hydrocarbons. The constraint is almost never the tote.
It is your local fire code, insurer and state environmental rules, which often restrict storing fuel in a non-metallic container, require secondary containment, or cap the volume on site. Check before you buy, because the container will arrive compliant and the installation may not be.
Can I use a tote for compost tea or digestate?
Yes, and Grade B rinsed is the right stock for it. The one rule is venting: biological activity generates gas, and a sealed cap on a fermenting cargo will bulge the bottle and eventually deform it permanently.
Fit a vented cap or a breather valve at the point of use, keep the unit out of direct sun to limit the temperature swing, and expect to wash it out between batches rather than at end of season.
What size tote for livestock water?
A 275 on a level bearing pad, Grade B rinsed with a documented prior cargo, black or painted rather than translucent. Translucent bottles grow algae in one season in the open.
Our framed trough build is the better answer if animals have direct access: a half-height open trough, 120 gallons, with the cage left intact as the frame. Full totes should never be where livestock can rub against them — 2,420 lb on four square feet does not need much persuasion to tip.
Can I heat the contents of a tote?
Gently and indirectly, never with a direct heat source on the wall. A blanket rated for IBC use, or a warm room, is fine. A torpedo heater pointed at the bottle, a flame, or any local hot spot is not.
Keep the cargo below 100 °F for normal service. Above that the bottle softens, creep accelerates and the stacking rating halves; above 120 °F do not stack at all. Heat-affected HDPE never recovers its original wall strength, and the failure comes later with no visible warning.
How do I get the last of the cargo out?
Tip the unit forward slightly so the sump is the low point, and vent the top cap while you drain — most 'the valve is blocked' calls are a vacuum lock, not a blockage. Crack the cap and listen for air.
Expect to leave under a gallon as heel in a standard sump. If recovering that last gallon matters to your economics, ask about units with a dedicated discharge geometry rather than fighting a standard sump.
Fourteen stations: what happens between the gate and the truck.
A container that arrives on a Monday morning and leaves as Grade A food on Thursday has been through fourteen stations, and at eight of them it can lose a grade or be pulled out entirely. This is the route, in order.
1 — Gate and declaration
Nothing comes off the trailer without a named prior cargo in writing. No name, no entry; the load goes back. This is the single rule that protects everything downstream, because one undeclared pesticide tote in a recirculating wash loop can affect a hundred units before anybody smells it.
2 — Exclusion screen
The declared cargo is checked against the published exclusion list. Pesticides, pharmaceutical actives, PFAS formulations, isocyanates, radiological material, fire-affected units and polymerising oils are refused outright, whatever the condition and whatever the price.
3 — Heel drain and measure
Residual cargo is drained, measured and routed to the correct waste stream. Under a gallon is normal. Above five gallons the load is a liquid-waste job rather than a container job, and it is priced or refused as one.
4 — Weigh and log
Yard scale, not a unit count. Every published tonnage on this site traces back to this scale, which is why our disposition table reports weight and units separately and why they do not divide into each other neatly.
5 — Cage and base inspection
Node by node, 44 to 54 of them, counted rather than sampled. Diagonals measured. Base welds loaded and watched. Galvanising checked at the welds, which is where it always goes first.
6 — Bottle condition
Wall thickness at four points, raking light across the whole surface for crazing, sump checked for stress whitening, mid-wall measured for bulge against a datum. This is where most grade losses happen, and none of them are about cleanliness.
7 — Wash route assignment
Decided here, by prior cargo, by an inspector — not at the sales desk by price. A food cargo goes to Route 3 whether the customer asked for it or not; an industrial cargo cannot buy its way onto Route 3.
8 — Wash
Route 1 rinse, Route 2 hot caustic, Route 3 potable triple rinse, or Route 4 to a customer's own written SOP. Temperature, dwell, rinse count and chemistry dosing are logged against the cage ID as it happens, not reconstructed afterwards.
9 — Rinse verification
Third-rinse conductivity against the day's measured supply water, final pH, 360-degree internal scope, and an independent two-operator odour check with the cap off. Any one of them failing sends the unit back to station 8.
10 — Hardware
New gasket on every Grade A and B unit, no exceptions. Valve function-tested and replaced if scored. New cap. Adapter threads checked under a light. Tamper seal on anything food-grade.
11 — Leak test
Pneumatic pressure decay on the complete assembly, under 1 kPa loss in ten minutes. Method, pressure, hold time and measured decay are written to the record — a pass with no numbers behind it is not a leak test.
12 — Grade and passport
The grade is assigned against the published criteria and written to the passport with the cage ID, the wash route, the test dates and the operator who did it. Seven years of retention, reissuable on request.
13 — Photography
Four shots of the actual unit plus the cage stamp, bay number visible. These go to the customer before payment. It started as a way of ending arguments about Grade B and became our best quality control, because an inspector who knows the photograph goes out grades more conservatively.
14 — Bay and load plan
Into one of 168 numbered bays by grade and configuration, then load-planned against trailer capacity. Twenty on the floor, forty double-stacked empty. If your order is twenty-two units, this is the station where somebody emails you to suggest twenty or forty.
How the container in your yard came to be shaped like that.
The modern caged IBC is a surprisingly young object, and almost every feature of it is the fossil of a specific problem.
Drums and nothing between
Liquids moved in 55-gallon drums or in bulk tankers. Anything in between meant handling dozens of drums, which is why the intermediate category was invented at all.
The first rigid composites
A blow-moulded plastic bottle inside a steel frame, sized to a pallet footprint so a forklift could handle it. The idea has not changed since.
The pallet footprint settles
40 × 48 inches in North America, 1,200 × 1,000 mm in Europe. Every trailer count on this site descends from that choice.
UN performance testing
Packagings began to be approved by design type and performance test rather than by prescription, which is where the 31HA1 marking family comes from.
Periodic testing arrives
The 2.5-year leak test and 5-year inspection cycle formalised, creating the date-stamped plate that decides whether a used unit can still carry a regulated cargo.
Reconditioning becomes a trade
Enough units in circulation, and enough value in a steel cage that outlasts three bottles, for washing and rebottling to be businesses rather than favours.
One bay and a used pressure washer
Re:IBCtote starts in a rented bay in metro Detroit, washing totes for local chemical blenders who could not get a straight answer about prior contents.
Grading gets published
We write down the disqualifiers rather than keeping them in an inspector's head, because the arguments about Grade B were taking more time than the washing.
The passport
Every unit gets a record keyed to its cage ID: intake, wash parameters, test results, grade, operator, dates. Seven-year retention, reissuable years later.
38,210 containers
Our largest year: 94.2% diverted, 4.4% residual published rather than rounded away, 4,281 tonnes of CO₂e avoided on factors we publish in full.
The same containers, different weather.
“Nobody has ever called us about a container failing. They call about a forklift, a rack or a floor, and it is always the same arithmetic: they multiplied gallons by 8.34 and the cargo was not water.”
Send us the cargo, not the grade.
Tell us what is going in the container and what you are doing with it, and we will name the grade, say what would disqualify a unit from it, and tell you if something cheaper does the job. That last part is why people come back.